62 products
62 products
62 products
OxyTyke™ Paediatric Mask inc 7′ tubing OT-1025-8
OT-1025-8
OxyTyke™ provides 22% to 65% oxygen on flows as low as .25 lpm and up to or greater than 5 lpm. OxyTyke™ is open and comfortable for the little ones to wear thus promoting better patient compliance. OxyTyke™ allows for easy access for other therapies, oral care and communication without interrupting the delivery of prescribed oxygen.
OxyTyke™ Reduces:
Oxygen Flow Settings | Approximate O2 Concentrations |
.25 L/min | 22% |
.50 L/min | 25% |
.75 L/min | 30% |
1 L/min | 35% |
1.5 L/min | 43% |
2 L/min | 47% |
3 L/min | 50% |
≥ 5 L/min | 65% |
Adjust flow from .25L/min up to required flow to achieve required oxygen level using a pulse oximeter
OxyTyke™ has the ability to maintain a concentrated flow of oxygen means that less oxygen flow is required to maintain a prescribed SpO2. To the hospital and to the ambulance this means patient safety and cost savings.
PVC Tubing 30 Metres 3mm bore size 1.5mm wall size Industrial Grade
36pvctubing
Regular price £13.22 Save £-13.22Industrial PVC Tubing 30 Metres
Clear 3mm bore size 1.5mm wall size
Provides an economical solution to applications, including low pressure conveyance of liquids, gases and granular solids.
NOT FOR MEDICAL USE.
Material Specification | |
Tensile Strength | 19.7 MPa |
Hardness | 77º Shore 'A' |
Density | 1.23 g/cm³ |
Elongation at Break | 345% |
Maximum Temperature | 65ºC |
Minimum Temperature | -16ºC |
Material Grade | Food |
Copy of Oxygen Flowmeter Tester 2 - 15 LPM
AG40715415
Regular price £25.97 Save £-25.97Intersurgical EcoLite™, paediatric, medium concentration oxygen mask with tube, 2.1m
1196015
Oxygen Tubing Connector For Invacare Homefill PMCD22-02
PMCD22-02
Oxygen Tubing Connector For Invacare Homefill PMCD22-02
PVC Tubing 30 Metres 8mm Bore 1.5mm Wall Industrial Grade
PVC81.5
Regular price £21.73 Save £-21.73Industrial PVC Tubing 30 Metres
Clear 8mm bore size 1.5 mm wall size OD 11 mm
Provides an economical solution to applications, including low pressure conveyance of liquids, gases and granular solids.
NOT FOR MEDICAL USE.
Material Specification | |
Tensile Strength | 19.7 MPa |
Hardness | 77º Shore 'A' |
Density | 1.23 g/cm³ |
Elongation at Break | 345% |
Maximum Temperature | 65ºC |
Minimum Temperature | -16ºC |
Material Grade | Food |